XTP CrossPoint Series • Operation
59
Setting the Front Panel Locks (Executive Modes)
The matrix switcher has three levels of front panel security lock that limit the operation of the
matrix switcher from the front panel. The three levels are:
•
Lock mode 0
— The front panel is completely unlocked. All front panel functions are
available.
•
Lock mode 1
— All changes are locked from the front panel (except for setting Lock
mode 2). Some functions can be viewed.
•
Lock mode 2
— Basic functions are unlocked. Advanced features are locked and can
be viewed only.
Basic functions consist of:
•
Making ties
•
Saving and recalling presets
•
Setting input audio gain and attenuation
•
Changing Lock modes
Advanced functions consist of:
•
Setting audio output mutes
•
Setting audio output volume
•
Setting the rear panel remote port protocol and baud rate
NOTE:
The matrix switcher is shipped from the factory in Lock mode 2.
Selecting Lock mode 2 or toggling between mode 2 and mode 0
NOTE:
If the matrix switcher is in Lock mode 0 or mode 1, this procedure selects
mode 2. The
Preset
,
View
, and
Esc
buttons blink twice.
If the matrix switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the
matrix switcher). The
View
and
Esc
blink twice.
Toggle the lock on and off by pressing and holding the
Preset
button, the
View
button, and
the
Esc
button simultaneously for approximately 2 seconds (see figure 44).
C O N T R O L
ESC
VIEW
PRESET
ENTER
C O N T R O L
ESC
VIEW
PRESET
ENTER
C O N T R O L
ESC
VIEW
PRESET
ENTER
C O N T R O L
ESC
VIEW
PRESET
ENTER
Press and
hold for 2 seconds.
Lock mode 2
Lock mode 0
Press and
hold for 2 seconds.
Figure 44.
Toggle Front Panel Lock Between Mode 2 and Mode 0
