XTP CrossPoint Series • Operation
63
4
Hold down the
Reset
button twice
(once at 3 seconds and again at 6
seconds). Then press and release
Reset
(<1 second) within 1 second.
Mode 4
:
•
Enables ARP capability.
•
Sets the IP address to the factory default.
•
Sets the subnet address to the factory
default.
•
Sets the gateway address to the factory
default.
•
Sets port mapping to the factory default.
•
Turns DHCP off.
•
Turn events off.
The Reset LED blinks four times in quick
succession during the reset.
Mode 4 enables
you to set
IP address
information using
ARP and the
MAC address.
5
Hold down the
Reset
button until the
Reset LED blinks three times (once
at 3 seconds, again at 6 seconds,
and then again at 9 seconds). Then
press and release
Reset
(<1 second)
within 1 second.
Mode 5 performs a complete reset to
factory defaults (with the exception of the
firmware)
:
•
Does everything mode 4 does.
•
Resets most real time adjustments,
including:
•
clears all ties and presets
•
clears all mutes
•
disables all RS-232 output inserts
•
clears all audio settings
•
Resets all IP options.
•
Removes/clears all files for the matrix
switcher.
The reset LED blinks four times in quick
succession during the reset.
Mode 5 is useful
if you want to
start over with
configuration and
uploading or to
replace events.
