XTP CrossPoint Series • Installation
16
XTP CP 4i DVI Pro (DVI Pro input board)
IN
XTP CP 4i DVI Pro
AUDIO
L
R
L
R
L
R
L
R
IN
8
8
8
8
8
8
8
8
7
7
Figure 8.
DVI Pro Input Board Connectors
NOTE:
Although the DVI Pro boards use DVI-I connectors, the matrix switchers
handle only DVI-D (digital) video.
1
Input connectors
— Connect a DVI cable between this port and the DVI output
port of the digital video source (see
on page 23 for pin
assignments).
2
Audio inputs (analog audio) connectors
— Connect balanced or
unbalanced stereo audio inputs to these 3.5 mm, 5-pole captive screw
connectors (see
the connectors).
XTP CP 4i 3G-SDI (3G/HD-SDI/SDI input board)
IN
AUDIO
L
R
L
R
L
R
L
R
IN
XTP CP 4i 3G-SDI
LOOP OUT
INPUT
LOOP OUT
INPUT
LOOP OUT
INPUT
LOOP OUT
INPUT
7
7
¢
¢
¢
¢
¢
¢
¢
¢
9
9
9
9
9
9
9
9
Figure 9.
3G Input Board Connectors
1
Input connectors
— Connect a 3G-SDI, HD-SDI, or SDI video
input to this BNC connector. The board also accepts embedded
digital audio on this port.
2
Loop Out connector
— Connect a local digital display to this BNC connector for
a buffered loop-through on the input signal.
NOTE:
The board ships with 75 ohm terminators on the Loop Out connectors.
Extron recommends leaving these installed when the loop out is not used.
3
Audio inputs (analog audio) connectors
— Connect balanced or
unbalanced stereo audio inputs to these 3.5 mm, 5-pole captive screw
connectors (see
the connectors).
XTP CP 4i VGA (VGA Input board)
IN
XTP CP 4i VGA
AUDIO
L
R
L
R
L
R
L
R
IN
2
2
1
1
1
1
1
1
1
1
Figure 10.
VGA Input Board Connectors
1
Input connectors
— Connect a VGA cable between this port
and the analog video output port of the digital video source (see
on page 23 for pin assignments and
non-RGB video formats).
2
Audio Inputs (analog audio) connectors
— Connect balanced or
unbalanced stereo audio inputs to these 3.5 mm, 5-pole captive screw
connectors (see
the connectors).
LOOP OUT
INPUT
