XTP CrossPoint Series • Installation
19
XTP CP 4o DVI Pro (DVI Pro Output board)
OUT
XTP CP 4o DVI Pro
AUDIO
L
R
L
R
L
R
L
R
OUT
1
1
1
1
1
1
1
1
2
2
Figure 15.
DVI Pro Output Board Connectors
NOTE:
Although the DVI Pro boards use DVI-I connectors, the matrix switchers
handle only DVI-D (digital) video.
1
Output connector
— Connect a DVI cable between this port and an DVI video
on page 23 for pin assignments).
2
Audio Outputs (analog audio) connectors
— Connect audio devices
such as an audio amplifier or powered speakers, to these 3.5 mm,
5-pole captive screw connectors. These connectors output unamplified,
level audio, whether it is tied from an analog input or de-embedded from a
digital input (see
Analog audio output connectors
on page 25 to wire the
connectors).
XTP CP 4o SA (Analog Audio Output board)
OUT
XTP CP 4o SA
AUDIO
L
R
L
R
L
R
L
R
OUT
1
1
Figure 16.
Analog Audio Board Connectors
1
Audio Outputs (analog audio) connectors
— Connect audio
devices such as an audio amplifier or powered speakers, to these
3.5 mm, 5-pole captive screw connectors. These connectors output
unamplified, level audio, whether it is tied from an analog input or de-embedded
from a digital input (see
Analog audio output connectors
the connectors).
Input and output pin assignments and wiring
TP connectors
It is essential that your cables (on the XTP and LAN [Ethernet] connectors) be the correct
type and that they be properly terminated with the correct pinout. These links use
unshielded twisted pair (UTP) or shielded twisted pair (STP) cables, terminated with RJ-45
connectors. XTP and LAN cables are limited to a length of 330 feet (100 m).
NOTES:
•
Do not use standard telephone cables. Telephone cables do not support Ethernet
or Fast Ethernet.
•
Do not stretch or bend cables. Transmission errors can occur.
