Extron electronics XTP CrossPoint 3200, User Manual

Page: 40 / 167

XTP CrossPoint Series • Operation 32
Control Buttons
NOTE: See Front Panel Operations , beginning on page 35, for detailed
descriptions of the following operations.
Primary functions
Action Save changes Select Preset mode Select View mode Cancel or Escape
Indication Blink : Save needed Blink : Save preset
Lit : Recall preset
View mode
selected Blinks once
ENTER PRESET
VIEW
ESC
Secondary functions
Port
configuration Action 1 Select Configuration mode.
Action 2 Select 9600 baud Select 19200 baud Select 38400 baud Select 115200
baud
Indication Blink : 9600 baud Blink : 19200 baud Blink : 38400 baud Blink : 115200 baud
Front panel
locks
Action 1 Select Lock mode 1 or toggle between
mode 2 and mode 1.
Action 2 Select Lock mode 2 or toggle between mode 0 and mode 2.
Audio Action In Audio mode,
decrease
input
level or output
volume .
In Audio mode,
increase
input
level or output
volume .
C
Enter button (see figure 28 on page 29 or figure 29 on page 30) —
Enter
has
two primary ( ) and two secondary functions (•):
Saves configuration or preset changes that you make on the front panel. To create a
simple configuration:
•
Specify video, audio, or both (see I/O buttons [
G
] and [
H
]).
•
Press the desired input button (
A
).
•
Press the desired output button or buttons (
B
).
•
Press the Enter button.
Indicates that a potential tie has been created but not saved.
•
With the
Preset
,
View
, and
Esc
buttons, selects Serial Port Configuration mode.
•
Selects 9600 baud for the rear panel Remote port in Serial Port Configuration mode
and indicates the selection.
D
Preset button (see figure 28 or figure 29 ) — Preset has two primary ( ) and three
secondary functions (•):
Activates Save Preset mode to save a configuration as a preset and Recall Preset
mode to activate a previously-defined preset.
Blinks when Save Preset mode is active and lights steadily when Recall Preset mode
is active.
•
With the
Enter
,
View
, and
Esc
buttons, selects Serial Port Configuration mode.
•
Selects 19200 baud for the rear panel Remote port in Serial Port Configuration mode
and indicates the selection.
•
With the
View
and
Esc
buttons, selects front panel security Lock mode 2 or toggles
between mode 0 (unlocked) and mode 2.