4-10
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
S
WITCH
M
ANAGEMENT
C
OMMANDS
Table 4-6
describes Switch management commands.
Table 4-5: User Account Commands
Command
Description
show account
Displays the account names, access level,
number of successful and failed login attempts,
and the number of active sessions in the user
database. This command is available only to
admin level users.
create account [admin | user] <username>
{<password>}
Creates a user account.
delete account <username>
Deletes a user account
config account <username> {<password>}
Changes the password of an existing account.
Table 4-6: Switch Management Commands
Command
Description
show management
Displays network management configuration
and statistics, including enable/disable states
for Telnet and SNMP, SNMP community
strings, authorized SNMP station list, SNMP
trap receiver list, and login statistics.
show session
Displays the currently active Telnet and
console sessions communicating with the
Switch. Provides the user name, IP address of
the incoming Telnet session, whether a
console session is currently active, and login
time. Sessions are numbered.
clear session <number>
Terminates a Telnet session from the Switch.
logout | quit
Logs out of a console or Telnet session. If
used during a Telnet session, also closes the
TCP Telnet session.
enable telnet
Enables Telnet access to the Switch.
disable telnet
Disables Telnet access to the Switch.
enable web
Enables web access to the Switch. Requires a
reboot to take effect.
SUMMIT.BK Page 10 Thursday, September 25, 1997 12:33 PM
