4-26
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
L
OGGING
C
OMMANDS
Table 4-18
describes Switch logging commands.
Table 4-18: Logging Commands
Command
Description
show log config
Displays the log configuration, including the
syslog host IP address, the priority level of
messages being logged locally, and the
priority level of messages being sent to the
syslog host.
show log {<priority>} {<subsystem>}
Displays the current snapshot of the log.
Options include:
■
priority
— Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
■
subsystem
— Filters the log to display
messages associated with the selected
Switch subsystem. Subsystems include
Syst, STP, Brdg, SNMP, Telnet, VLAN,
and Port. If not specified, all subsystems
are displayed.
clear log
Clears the log.
config log display {<priority>} {<subsystem>}
Configures the real-time log display. Options
include:
■
priority
— Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
■
subsystem
— Filters the log to display
messages associated with the selected
Switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
displayed.
SUMMIT.BK Page 26 Thursday, September 25, 1997 12:33 PM
