S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
11-3
B
OOT
O
PTION
C
OMMANDS
To save the conÞguration, use the following command:
save {config} {primary | secondary}
To use the conÞguration, use the following command:
use config {primary | secondary}
The conÞguration takes effect on the next reboot.
R
ETURNING
TO
F
ACTORY
D
EFAULTS
To return the Switch conÞguration to factory defaults, enter the following command:
unconfig switch
This command resets the entire conÞguration, with the exception of user accounts and
passwords that have been conÞgured.
To reset all parameters, enter the following command:
unconfig switch all
B
OOT
O
PTION
C
OMMANDS
Table 11-1
lists the commands associated with Summit boot options.
Table 11-1: Boot Option Commands
Command
Description
download config <ipaddress> <filename>
Downloads a previously saved ASCII
configuration file from a specific IP host. You
must specify the IP address of the host and
the configuration filename.
download image <ipaddress> <filename>
{primary | secondary}
Downloads a new image from a TFTP server.
You must specify the IP address of the TFTP
server and the image filename.
save {config} {primary | secondary}
Saves the current configuration of the Switch
to NVRAM. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the configuration
area currently in use.
SUMMIT.BK Page 3 Thursday, September 25, 1997 12:33 PM
