4-18
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
B
ASIC
IP C
OMMANDS
Table 4-13
describes basic IP commands.
config qosmode [explicit | implicit]
Changes the QoS mode to explicit mode or
implicit mode.
create qosprofile <qosname>
Creates a QoS profile. The default values
assigned to a created QoS profile are as
follows:
■
Minimum bandwidth — 0%
■
Maximum bandwidth — 100%
■
Priority — low
delete qosprofile <qosname>
Deletes a QoS profile.
config qosprofile <qosname> {minbw
<percent>} {maxbw <percent>} {priority
<level>}
Configures a QoS profile. Specify:
■
minbw
— The minimum bandwidth
percentage guaranteed to be available to
this queue. The default setting is 0.
■
maxbw
— The maximum bandwidth
percentage that this queue is permitted to
use. The default setting is 100.
■
priority
— The service priority for this
queue. Settings include low, medium-low,
medium, high. The default setting is low.
Table 4-13: Basic IP Commands
Command
Description
show ip config {vlan [<name> | all]}
Displays configuration information for one or
more VLANs, including the following:
■
IP address, subnet mask
■
IP forwarding information
■
BOOTP configuration
■
VLAN name, VLANid
Table 4-12: QoS Commands (continued)
Command
Description
SUMMIT.BK Page 18 Thursday, September 25, 1997 12:33 PM
