S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
4-15
S
UMMIT
C
OMMANDS
STP C
OMMANDS
Table 4-11
describes STP commands.
config port <portlist> auto off {speed [10 | 100]}
duplex [half | full]
Changes the configuration of a group of ports.
Specify the following:
■
auto off
— The port will not autonegotiate
the settings.
■
speed
— The speed of the port (for 10/100
Mbps ports on the Summit2, only.
■
duplex
— The duplex setting (half- or
full-duplex).
config port <portlist> qosprofile <qosname>
Configures one or more ports to use a
particular QoS profile.
enable port <portlist>
Enables one or more ports.
disable port <portlist>
Disables one or more ports.
enable smartredundancy <portlist>
Enables smart redundancy on the Summit2
redundant Gigabit Ethernet port.
disable smartredundancy <portlist>
Disables smart redundancy on the Summit2.
Table 4-11: STP Commands
Command
Description
show stpd {<stpd_name> | all}
Displays STP information for one or all STPDs
on the Switch.
show stpd <stpd_name> port <portlist>
Displays port-specific STP information.
create stpd <stpd_name>
Creates an STPD. When created, an STPD
has the following default parameters:
■
Bridge priority — 32,768
■
Hello time — 2 seconds
■
Forward delay — 15 seconds
delete stpd <stpd_name>
Removes an STPD. An STPD can only be
removed if all VLANs have been deleted from
it.
config stpd <stpd_name> add vlan <name>
Adds a VLAN to the STPD.
Table 4-10: Port Commands
Command
Description
SUMMIT.BK Page 15 Thursday, September 25, 1997 12:33 PM
