C-4
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
T
ROUBLESHOOTING
You forget your password and cannot log in:
If you are not an administrator, another user having administrator access level can log
in, delete your user name, and create a new user name for you, with a new password.
Alternatively, another user having administrator access level can log in and initialize the
device. This will return all conÞguration information (including passwords) to the
initial values.
In the case where no one knows a password for an administrator level user, contact
your supplier.
VLAN
S
You cannot add a port to a VLAN:
If you attempt to add a port to a VLAN and get an error message similar to
localhost:7 # config vlan marketing add port 1,2
ERROR: Protocol conflict.
you already have a VLAN using untagged trafÞc on a port. Only one VLAN using
untagged trafÞc can be conÞgured on a single physical port. VLAN conÞguration can be
veriÞed by using the command
show vlan <name>
The solution for this error is to remove ports 1 and 2 from the VLAN currently using
untagged trafÞc on those ports. If this were the ÒdefaultÓ VLAN, the command would
be
localhost:23 # config vlan default del port 1,2
which should now allow you to re-enter the previous command without error as
follows:
localhost:26 # config vlan red add port 1,2
SUMMIT.BK Page 4 Thursday, September 25, 1997 12:33 PM
