S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
9-5
C
ONFIGURING
IP U
NICAST
R
OUTING
Table 9-1
describes the commands used to conÞgure basic IP settings on the Switch.
Table 9-1: Basic IP Commands
Command
Description
enable bootp {vlan <name> | all}
Enables the generation and processing of
BOOTP packets on a VLAN to obtain an
IP address for the VLAN from a BOOTP
server. The default setting is enabled for
all VLANs.
enable bootprelay
Enables the forwarding of BOOTP and
Dynamic Host Configuration Protocol
(DHCP) requests.
enable ipforwarding {vlan <name> | all}
Enables IP routing for one or more
VLANs. If no argument is provided,
enables routing for all VLANs that have
been configured with an IP address. The
default setting for
ipforwarding
is
disabled.
enable ipforwarding broadcast {vlan <name> | all}
Enables forwarding IP broadcast traffic for
one or more VLANs. If no argument is
provided, enables broadcast forwarding
for all VLANs. To enable,
ipforwarding
must be enabled on the VLAN. The default
setting is enabled.
config bootprelay add <ipaddress>
Adds the IP destination address to forward
BOOTP packets.
config bootprelay delete [<ipaddress> | all]
Removes one or all IP destination
addresses for forwarding BOOTP packets.
config iparp add <ipaddress> <mac_address>
Adds a permanent entry to the ARP table.
Specify the IP address and MAC address
of the entry.
config iparp delete <ipaddress>
Deletes an entry from the ARP table.
Specify the IP address of the entry.
disable bootp vlan [<name> | all]
Disables the generation and processing of
BOOTP packets.
disable bootprelay
Disables the forwarding of BOOTP
requests.
disable ipforwarding {vlan <name> | all}
Disables routing for one or more VLANs.
disable ipforwarding broadcast {vlan <name> | all}
Disables routing of broadcasts to other
networks.
SUMMIT.BK Page 5 Thursday, September 25, 1997 12:33 PM
