4-20
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
IP ARP C
OMMANDS
Table 4-14
describes IP ARP commands.
config bootprelay add <ipaddress>
Adds IP addresses to be used as IP
destinations to forward BOOTP packets.
config bootprelay delete [<ipaddress> | all]
Deletes one or all IP addresses that were used
as IP destinations to forward BOOTP packets.
show iparp {<ipaddress> | vlan <name> | all |
permanent}
Displays the current Address Resolution
Protocol (ARP) cache for a selected IP
address, VLAN, or all entries. With no options,
information for all VLANs is displayed.
Information displayed includes IP address,
MAC address, aging timer value, VLAN name,
VLANid, and port number.
clear iparp [<ipaddress> | vlan <name> | all]
Removes dynamic entries in the IP ARP table.
show iproute vlan {<name> | all | permanent}
Displays the contents of the IP routing table.
config iproute add default <gateway>
{<metric>}
Adds a default gateway. A default gateway
must be located on a configured IP interface.
config iproute delete default <gateway>
Deletes a default gateway.
Table 4-14: IP ARP Commands
Command
Description
show iparp {<ipaddress> | vlan <name> | all |
permanent}
Displays the current Address Resolution
Protocol (ARP) cache for a selected IP
address, VLAN, or all entries. With no options,
information for all VLANs is displayed.
Information displayed includes IP address,
MAC address, aging timer value, VLAN name,
VLANid, and port number.
clear iparp [<ipaddress> | vlan <name> | all]
Removes dynamic entries in the IP ARP table.
config iparp add <ipaddress> <mac_address>
Adds a permanent IP ARP entry to the system.
The IP address is used to match the IP
interface address to locate a suitable interface.
config iparp delete <ipaddress>
Removes an IP ARP entry from the table.
show iproute vlan {<name> | all | permanent}
Displays the contents of the IP routing table.
Table 4-13: Basic IP Commands (continued)
Command
Description
SUMMIT.BK Page 20 Thursday, September 25, 1997 12:33 PM
