4-14
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
P
ORT
C
OMMANDS
Table 4-10
describes port commands.
create fdbentry <mac_address> vlan <name>
<portlist>
Creates a permanent FDB entry. Specify the
following:
■
mac_address
— Device MAC address,
using colon-separated bytes.
■
name
— VLAN associated with MAC
address.
■
portlist
— Port number associated with
MAC address.
If more than one port number is associated
with a permanent MAC entry, packets are
multicast to the multiple destinations.
delete fdbentry <mac_address> vlan <name>
Deletes a permanent FDB entry.
config fdb agingtime <number>
Configures the FDB aging time. The range is
15 through 1,000,000 seconds. The default
value is 1,800 seconds. A value of 0 indicates
that the entry should never be aged out.
Table 4-10: Port Commands
Command
Description
show port <portlist> config
Displays state, link status, speed, and
autonegotiation setting for each port.
show port <portlist> stats
Displays port information including physical
layer configuration and statistics.
show port <portlist> errors
Displays error information for one or more
ports.
show port <portlist> collisions
Displays real-time collision statistics.
show port <portlist> packet
Displays a histogram of packet statistics for
one or more ports.
config port <portlist> auto on
enables autonegotiation for the particular port
type: 802.3u for 10/100 Mbps ports or 802.3z
for Gigabit Ethernet ports.
Table 4-9: FDB Commands (continued)
Command
Description
SUMMIT.BK Page 14 Thursday, September 25, 1997 12:33 PM
