4-8
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
G
ENERAL
S
WITCH
C
OMMANDS
Table 4-4
describes general Switch commands.
Table 4-4: General Switch Commands
Command
Description
show switch
Displays the current Switch information,
including:
■
sysName, sysLocation, sysContact
■
MAC address
■
Current date and time, and system uptime
■
Operating environment (temperature, fans,
and power supply status)
■
Nonvolatile Random Access Memory
(NVRAM) image information
(primary/secondary image, date, time, size,
version)
■
NVRAM configuration information
(primary/secondary configuration, date,
time, size, version)
■
Scheduled reboot information
■
System serial number and reworks indicator
■
Software platform
■
System ID
■
Power supply and fan status
show version
Displays the hardware and software versions
currently running on the Switch. Also displays
the Switch serial number.
show memory
Displays the current system memory
information.
reboot {<time>}
Reboots the Switch at the time specified. If no
time is specified, the Switch reboots
immediately following the command.
config time <time>
Configures the system date and time. The
format for
<time>
is:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format.
SUMMIT.BK Page 8 Thursday, September 25, 1997 12:33 PM
