4-6
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
config devicemode [bridging | iprouting | ipmc ]
Configures the operating mode of the
Switch. Specify:
■
bridging
— Layer 2 bridging
functions only
■
iprouting
— Bridging and IP unicast
routing functions
■
ipmc
— Bridging, IP unicast routing,
and IP multicast routing functions
If this command is used to change the
operating mode of the Summit once it is
up and running, it causes the Switch to
save the configuration and reboot. The
default operating mode is
iprouting
.
config port <portlist> auto off {speed [10 | 100]}
duplex [half | full]
Manually configures the port speed and
duplex setting of one or more ports. For
more information on configuring ports,
refer to
Chapter 3
.
config time <time>
Configures the system date and time. The
format for
<time>
is:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format.
config vlan <name> ipaddress <ip_address>
{<mask>}
Configures an IP address and subnet
mask for a VLAN.
enable bootp vlan [<name> | all]
Enables BOOTP for one or more VLANs.
For more information on using BOOTP,
refer to
Chapter 3.
clear session <number>
Terminates a Telnet session from the
Switch.
disable bootp vlan [<name> | all]
Disables BOOTP for one or more VLANs.
disable port <portlist>
Disables a port.
disable telnet
Disables Telnet access to the Switch.
disable web
Disables web access to the Switch.
delete account <username>
Deletes a user account.
delete vlan <name>
Deletes a VLAN.
Table 4-3: Common Commands (continued)
Command
Description
SUMMIT.BK Page 6 Thursday, September 25, 1997 12:33 PM
