3-2
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
A
CCESSING
T
HE
S
WITCH
A user-level account can use the
ping
command to test device reachability, and change
the password assigned to the account name. If you have logged on with user
capabilities, the command-line prompt will end with a (>) sign. For example:
Summit1:2>
An administrator-level account can view and change all Switch parameters. It can also
add and delete users, and change the password associated with any account name. The
administrator can disconnect a management session that has been established by way of
a Telnet connection. If this happens, the user logged on by way of the Telnet connection
is notiÞed that the session has been terminated.
If you have logged on with administrator capabilities, the command-line prompt will
end with a (#) sign. For example:
Summit1:18#
The prompt text is taken from the SNMP
sysname
setting. The number that follows the
colon indicates the sequential line/command number.
If an asterisk (*) appears in front of the command-line prompt, it indicates that you
have outstanding conÞguration changes that have not been saved. For example:
*Summit1:19#
For more information on saving configuration changes, refer to
Chapter 11
.
D
EFAULT
A
CCOUNTS
By default, the Switch is conÞgured with two accounts, as shown in
Table 3-1
.
Table 3-1: Default Accounts
Account Name
Access Level
admin
This user can access and change all manageable
parameters. The admin account cannot be deleted.
user
This user can view (but not change) all manageable
parameters, with the following exceptions:
■
This user cannot view the user account database.
■
This user cannot view the SNMP community strings.
This user has access to the
ping
command.
SUMMIT.BK Page 2 Thursday, September 25, 1997 12:33 PM
