S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
3-17
P
ORT
C
OMMANDS
config port <portlist> auto off {speed [10 |
100]} duplex [half | full]
Changes the configuration of a group of ports.
Specify the following:
■
auto off
— the port will not autonegotiate
the settings
■
speed
— the speed of the port (for 10/100
Mbps ports on the Summit2, only)
■
duplex
— the duplex setting (half- or
full-duplex)
config port <portlist> qosprofile <qosname>
Configures one or more ports to use a particular
QoS profile.
For more information on QoS, refer to
Chapter 8
.
enable port <portlist>
Enables a port.
disable port <portlist>
Disables a port. Even when disabled, the link is
available for diagnostic purposes.
enable smartredundancy <portlist>
Enables the smart redundancy feature on the
Summit2 redundant Gigabit Ethernet port. When
the smart redundnacy feature is enabled, the
Switch alway uses the primary link when the
primary link is available.
disable smartredundancy <portlist>
Disables the smart redundancy feature on the
Summit2. If the feature is disabled, the Switch
changes the active link only when the current
active link becomes inoperable.
show port <portlist> config
Displays the port configuration.
show port <portlist> stats
Displays real-time port statistics. For more
information on port statistics, refer to
Chapter 10
.
show port <portlist> errors
Displays real-time error statistics. For more
information on error statistics, refer to
Chapter 10
.
show port <portlist> collisions
Displays real-time collision statistics.
show port <portlist> packet
Displays a histogram of packet statistics.
Table 3-6: Port Commands (continued)
Command
Description
SUMMIT.BK Page 17 Thursday, September 25, 1997 12:33 PM
