S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
5-15
D
ELETING
VLAN
S
To display protocol information, use the following command:
show protocol {<protocol> | all}
Sample output from this command is as follows.
show protocol all
Protocol Name Type Value
---------------- ---- ------
IP etype 0x0806
etype 0x0800
ipx etype 0x8137
netbios 11c 0xf0f0
decnet etype 0x6004
etype 0x6003
This
show
command displays protocol information, including the following:
¥
Protocol name
¥
List of protocol Þelds
¥
VLANs that use the protocol
D
ELETING
VLAN
S
To delete a VLAN, or to return VLAN settings to their defaults, use the commands
listed in
Table 5-2
.
Table 5-2: VLAN Delete and Reset Commands
Command
Description
unconfig vlan <name> ipaddress
Resets the IP address of the VLAN.
delete vlan <name>
Removes a VLAN.
delete protocol <protocol>
Removes a protocol.
SUMMIT.BK Page 15 Thursday, September 25, 1997 12:33 PM
