Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 664 / 2546

664 ExtremeWare 7.5 Command Reference Guide
Commands for Status Monitoring and Statistics
clear transceiver-test
clear transceiver-test
Description
Clears (resets) the transceiver test statistics.
NOTE
This command is available only on the “i” series modular switches.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
To display the transceiver test statistics, use the
show diagnostics sys-health-check
command. The
following is sample output:
Transceiver system health diag result
Pass/Fail Counters Are in HEX
Slot Cardtype Cardstate Test Pass Fail Time_last_fail
---- -------- --------- ---- -------- -------- --------------
slot 1 Unknown
slot 2 Unknown
slot 3 FM8V Operational MAC 2b81b 0
slot 4 GM4X Operational MAC 2b81b 0
BPLNE SMMI Operational UART 2b81a 0
BPLNE SMMI Operational FLASH 2b81a 0
BPLNE SMMI Operational SRAM 2b81a 0
BPLNE SMMI Operational NVRAM 2b81a 0
BPLNE SMMI Operational ENET 2b81a 0
BPLNE Basbrd Operational QUAKE 2b81a 0
BPLNE Basbrd Operational TWISTER 2b81a 0
Example
The following command clears (resets) all of the transceiver test statistics:
clear transceiver-test
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.