Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 919 / 2546

configure tacacs-accounting server
ExtremeWare 7.5 Command Reference Guide 919
configure tacacs-accounting server
configure tacacs-accounting [primary | secondary] server [<ipaddress> |
<hostname>] {<tcp_port>} client-ip <ipaddress>
Description
Configures the primary and secondary accounting servers.
Syntax Description
Default
Unconfigured
Usage Guidelines
You can use the same server for accounting and authentication.
Use this command to specify the accounting server information for up to two primary and
two secondary accounting servers.
Use of the
hostname
parameter requires that DNS be enabled.
To remove a server, use the following command:
unconfigure tacacs
Example
The following command configures server tacacs1 as the primary accounting server for client
switch 10.10.20.35:
configure tacacs-accounting primary server tacacs1 client-ip 10.10.20.35
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
primary Configures the primary accounting server.
secondary Configures the secondary accounting server.
ipaddress Specifies the IP address of the server being configured.
hostname Specifies the host name of the server being configured. Must be able to be resolved
to an IP address.
tcp_port Specifies the TCP port to use to contact the server.
ipaddress The IP address used by the switch to identify itself when communicating with the
accounting server.