Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 547 / 2546

configure slb node max-connections
ExtremeWare 7.5 Command Reference Guide 547
configure slb node max-connections
configure slb node <ip address>:[ftp | http | https | imap4 | ldap | nntp |
pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or UDP
port number>] max-connections <number>
Description
Configures the maximum number of simultaneous connections that can be established to a node.
Syntax Description
Default
The default is 0.
Usage Guidelines
Use this command to limit the number of connections possible to a server with limited capabilities. Use
max-connections
of 0 to specify no limit.
Example
The following command configures the server with an IP address of 10.1.1.2:80 to accept a maximum of
10 connections:
configure slb node 10.1.1.2 : 80 max-connections 10
ip address Specifies the IP address of the node.
ftp Specifies the FTP TCP port check.
http Specifies the HTTP TCP port check.
https Specifies the HTTPS TCP port check.
imap4 Specifies the IMAP4 TCP port check.
ldap Specifies the LDAP TCP port check.
nntp Specifies the NNTP TCP port check.
pop3 Specifies the POP3 TCP port check.
smtp Specifies the SMTP TCP port check.
socks Specifies the SOCKS TCP port check.
telnet Specifies the telnet TCP port check.
tftp Specifies the TFTP TCP port check.
web Specifies the Web TCP port check.
wildcard Specifies any port associated with a wildcard server.
www Specifies the www TCP port check.
TCP or UDP port number Specifies a TCP or UDP port for the TCP port check.
max-connections Specifies the maximum number of simultaneous connections. The range is 0
to 999999999.