Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 1281 / 2546

configure wireless ports interface ap-scan updated-trap
ExtremeWare 7.5 Command Reference Guide 1281
configure wireless ports interface ap-scan updated-trap
configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
updated-trap <on | off>
Description
Use this command to configure the access point (AP) scan to send an SNMP trap when information
about an AP has changed.
Syntax Description
Default
Off.
Usage Guidelines
None.
Example
The following example enables the port 20 on a Summit 300-24 using interface 1 to send an SNMP trap
when an AP has changed.
configure wireless ports 20 interface 1 ap-scan updated-trap on
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
portlist Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
on Specifies to send an SNMP trap when an AP has changed.
off Specifies not to send an SNMP trap when an AP has changed.