Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 336 / 2546

336 ExtremeWare 7.5 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
show ports sharing
show ports <portlist> sharing
Description
Displays port loadsharing groups.
Syntax Description
Default
N/A
Usage Guidelines
None
Example
The following example shows all of the load sharing groups on the Summit 400:
* Summit400-48t:46 # show ports sharing
Load Sharing Monitor
Config Current Ld Share Ld Share Link Link
Master Master Type Group Status Ups
==========================================================
37 37 a 37 A 1
a 38 R 0
a 39 A 1
a 40 A 1
a 41 A 1
a 42 A 1
Link Status: (A) Active, (D) Disabled, (LB) Loopback, (ND) Not Distributing
(NP) Not Present, (R) Ready
Ld Share Type: (a) address based
The next example shows dynamic load sharing configured on a Summit 300-24:
* Summit300-24:29 # show ports sharing
Load Sharing Monitor
Config Current Ld Share Ld Share Link Link
Master Master Type Group Status Ups
==========================================================
1 1 dy 1 ND 1
dy 2 D 0
Link Status: (A) Active, (D) Disabled, (LB) Loopback, (ND) Not Distributing
(NP) Not Present, (R) Ready
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports. On
a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.