Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 239 / 2546

show snmpv3 user
ExtremeWare 7.5 Command Reference Guide 239
show snmpv3 user
show snmpv3 user {{hex <hex value>} <user name>}
Description
Displays detailed information about the user.
Syntax Description
Default
N/A.
Usage Guidelines
The
show snmpv3 user
command displays the details of a user. If you do not specify a user name, the
command will display details for all the users. The authentication and privacy passwords and keys will
not be displayed.
The user entries in SNMPv3 are stored in the USMUserTable, so the entries are indexed by EngineID
and user name.
Example
The following command lists all user entries:
show snmpv3 user
The following command lists details for the specified user, admin
:
show snmpv3 user admin
Output from the command is similar to:
Engine-ID : 80:00:07:7c:03:00:e0:2b:80:07:00 'H'
User Name : admin
Security Name : admin
Authentication : HMAC-MD5
Privacy : DES
Storage Type : Permanent
Row Status : Active
History
This command was first available in ExtremeWare 7.1.0.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
user name Specifies the user name to display.