Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 348 / 2546

348 ExtremeWare 7.5 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
Slot 6 information:
State: Empty
HW Module Type: Empty
Configured Type: Not configured
Slot 7 information:
State: Empty
HW Module Type: Empty
Configured Type: Not configured
Slot 8 information:
State: Empty
HW Module Type: Empty
Configured Type: Not configured
Example 2—Stack of Switches
The following example shows slot information for a stack of switches:
* Stk Master:13 # show slot
Slot 1 information:
State: Operational
Serial number: --
HW Module Type: S400-24P
Master: 00:04:96:1F:A7:3A
Primary EW Ver: 7.4e.0.28 [non-ssh]
Secondary EW Ver: 7.4e.0.10 branch-McastExtn_v74e0b10-r2 [non-ssh]
Image Selected: Primary
Image Booted: Primary
Config Selected: Primary
Config Booted: Primary
Primary Config: Created By EW Version: 7.4.0.26
Secondary Config: Empty
Configured Type: Not configured
Inline-power:
Total Common: 376W
Consumed: 0.0W
UTP ports available:
Link Active:
[26]
Link Down: 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
[25]