Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 1289 / 2546

configure wireless ports interface client-scan results timeout
ExtremeWare 7.5 Command Reference Guide 1289
configure wireless ports interface client-scan results
timeout
configure wireless ports <portlist> interface [1 | 2] client-scan results
timeout <number>
Description
Configures the timeout period for entries in the client scan information table.
Syntax Description
Default
600 seconds.
Usage Guidelines
Use this command to specify the age-out time for the clients in the client-scan results table.
Example
The following command sets the timeout period to 150 seconds for entries in the client scan information
table:
configure wireless ports 1:5-1:20 interface 2 client-scan results timeout 150
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
portlist Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
number Specifies the timeout in seconds for the client scan information table. Valid
numbers are between 0 and n (any number).