Extreme Networks ExtremeWare 7.5 Command Reference Manual Download Page 417

Page: 417 / 2546

delete fdbentry

ExtremeWare 7.5 Command Reference Guide

417

delete fdbentry

delete fdbentry [[<mac_address> | broadcast-mac] vlan <vlan name> | all]

Description

Deletes one or all permanent FDB entries.

Syntax Description

Default

N/A

Usage Guidelines

None

Example

The following example deletes a permanent entry from the FDB:

delete fdbentry 00:E0:2B:12:34:56 vlan marketing

The following example deletes all permanent entry from the FDB:

delete fdbentry all

History

This command was available in ExtremeWare 2.0.

This command was modified in ExtremeWare 6.2.0 to support the

all

option.

This command was modified in ExtremeWare 6.2.1 to support the

broadcast-mac

option.

This command was added to the Summit “

” series of switches in ExtremeWare 7.1e.

This command was modified in ExtremeWare 7.2.e to support the

broadcast-mac

option.

Platform Availability

This command is available on all platforms.

mac_address

Specifies a device MAC address, using colon-separated bytes.

broadcast-mac

Specifies the broadcast MAC address. May be used as an alternate to the colon-separated
byte form of the address ff:ff:ff:ff:ff:ff.

vlan name

Specifies a VLAN name.

all

Specifies that all FDB entries should be deleted.

Summary of Contents for ExtremeWare 7.5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.5, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.5

Reviews:

Related manuals for ExtremeWare 7.5

Brands by name

Popular brands