Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 1433 / 2546

unconfigure eaps port
ExtremeWare 7.5 Command Reference Guide 1433
unconfigure eaps port
unconfigure eaps <name> [primary | secondary] port
Description
Sets the specified port’s internal configuration state to INVALID.
Syntax Description
Default
N/A.
Usage Guidelines
Unconfiguring an EAPS port sets its internal configuration state to INVALID, which causes the port to
appear in the Idle state with a port status of Unknown when you use the
show eaps detail
command
to display the status information about the port.
Example
The following command unconfigures this node’s EAPS primary ring port on the domain eaps_1:
unconfig eaps eaps_1 primary port
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
name Specifies the name of an EAPS domain.
primary Specifies that the primary port should be unconfigured.
secondary Specifies that the secondary port should be unconfigured.