Extreme Networks ExtremeWare 7.5, Command Reference Manual

Page: 1742 / 2546

1742 ExtremeWare 7.5 Command Reference Guide
IGP Commands
configure ospf asbr-filter
configure ospf asbr-filter [<access profile> | none]
Description
Configures a route filter for all OSPF exported routes.
Syntax Description
Default
N/A.
Usage Guidelines
For “i” series switches.
For switches configured to support RIP, BGP, VIP, IS-IS, and static route
re-distribution into OSPF, an access profile can be used to limit the routes that are advertised into OSPF
for the switch as a whole.
For “e” series switches. For switches configured to support RIP and static route re-distribution into
OSPF, an access profile can be used to limit the routes that are advertised into OSPF for the switch as a
whole.
Example
The following command configures a route filter for all routes OSPF exports from RIP or other sources:
configure ospf asbr-filter subnet25-filter
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
access profile Specifies an access profile.
none Specifies not to apply an ASBR filter.