01-2019 5505 00
77
CHANGING THE NUMBER OF
TRAYS
To change the number of trays, act as fol-
lows:
1. Detach the machine plug from the power
mains.
2. Remove all trays from the machine.
3. Remove the pair of guides not used; pull
the safety pin and lift to release them.
4. Move the guides to the position you wish,
insert the guides into the rear slots and
hook the guide on the front side.
The safety pint will be inserted automati-
cally (you’ll hear a click)
Click
Fig. 45
1. rear slots
2. safety pin
5. Reassemble the trays by making sure
that the connectors are inserted properly.
6. Secure the removed wiring to prevent
it from hampering the movement of the
other trays.
7. Reprogramme the machine.
Re-number the trays with the selection
/ price display; press and hold the pro-
gramming key of the display down for 2
seconds.
Press the programming key of the dis-
play for a short time to number the tray.
The highest tray has a low number.
RECLINING TRAYS
Trays are complete with a leverage system
that enables the operator to recline them to
the bottom (reclining mechanism) to facili-
tate the load cycle.
Just lock the leverage system by means of
a screw in the position in which it is most
convenient for you to keep the tray horizon-
tal.
1
2
Fig. 46
1. Reclining tray lever
2. Lever locking holes (horizontal trays)