50
01-2019 5505 00
p
HotocEll
paramEtErs
The machine can be fitted (as a standard or
as an option according to the models) with
a device intended to detect the passage
of dispensed products by means of photo-
cells.
If this device is mounted, you can check the
following:
-Error before the dispensing cycle; when
the beam of the photocells is not read at
the start of the dispensing cycle.
-Error after the dispensing cycle; when the
motor fails during the dispensing cycle.
-“no product” error; when the device fails
to detect the product passage during the
dispensing cycle.
In these cases, you can programme the
machine to:
-set a rotation time for each spiral for fur-
ther arrangement for normal rotation;
-return the paid amount or not;
-lock any further selection on the spiral in
question.
Enabled: the selection is acknowledged as
empty and, therefore, disabled; if a request
is made for an "empty" selection, the ma-
chine displays the message “SELECTION
NOT AVAILABLE”
Disabled: the selection is not acknowl-
edged as empty and it remains available
even if empty.
D
ispENsiNg
compartmENt
lock
paramEtErs
The dispensing compartment can be fitted
(as a standard or as an option) with a lock
device.
Use this function to decide whether to leave
the compartment:
-"always free"
or whether to
-“release it upon dispensing”.
The door is only released for a well-defined
time interval (programmable from 1 to 10
minutes) in the “release upon dispensing”
mode as soon as you request for a product.
If the machine is equipped with an automat-
ic opening department, you can set up the
opening time of the compartment (0: auto-
matic opening disabled or up to one minute
and a half).
o
ut
-
of
-
orDEr
timE
The function is intended to put the machine
out of order for a well-defined time interval,
programmable between 1 and 10 minutes,
if the dispensing compartment remains
open.
The machine is put out of order if the lock
device is always closed during a dispensing
cycle.
o
ut
of
orDEr
if
opEN
To define the operation mode of the ma-
chine if the compartment is always open:
-Normal operation mode: The machine
continues to work normally.
-Out of order: The machine is put out of
order.
-Compartment not available: The machine
displays the error message “Compartment
not available”.
