01-2019 5505 00
57
D
ElEtE
rElativE
statistics
Statistics can be reset either globally (all
types of data) or selectively for:
-selections
-discounts-overprices
-failures
-coin mechanism data
-photocell error counters
-motor errors
- safety temperature exceeded (models
with food management enabled only)
Press the Enter key to display the request
for confirmation.
Press again to reset statistics.
p
riNt
statistics
It prints the data stored for the machine op-
eration either globally (all data) or partially
(some data only).
total
couNtErs
1 - counter by selection (single and total);
2 - counter by band;
3 - failure counter;
4 - coin mechanism data (audit and cash
collected);
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
partial
couNtErs
1 - counter by selection (single and total);
2 - counter by band;
3 - failure counter;
4 - coin mechanism data (audit and cash
collected);
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
Connect an RS232 serial printer having
9600 baud rate, 8 data bits, no parity, 1
stop bit with the serial connector on the but-
ton board to print all the statistics described
in the paragraphs “display general statis-
tics” and "display relative statistics”; the
machine code as well as the software date
and release will be also printed.
Statistics can be printed either relatively or
totally.
