22
01-2019 5505 00
OPERATION
TRAYS
To dispense a product included in a spiral
compartment:
-the motor intended to rotate the spiral is
activated
-the spiral will push the product forwards
and let it drop into the tray.
DISPENSING COMPARTMENT
LOCK
Some models are complete with a device
intended to lock the dispensing compart-
ment that is electrically released after a
dispensing cycle (see the compartment
lock parameters) to open the compartment
manually to take the dispensed product.
The dispensing compartment lock is an
alternative to the motorised compartment.
If you should open the compartment for
any reason whatsoever in case of a power
failure, act as follows:
-open the door of the equipment
-remove the last tray;
-remove the vandal-proof grid;
-operate the lock device manually.
SOFTVEND
Available for some models only.
Whenever you request for a selection, soft-
vend will reach the height of the tray dis-
pensing the product you have required.
The product falling into the softvend pocket
will be placed in the dispensing compart-
ment.
Softvend may not be used for the selec-
tions dispensed by the lowest trays; it is
lifted not to interfere with the dispensing
cycle.
The control electronics of the machine will
initialise softvend whenever you power on
the machine.
Attention !!!
If the glassfront is open, softvend can
not be electrically handled for safety
reasons.
However, you can operate softvend
manually. To avoid any misalignment
during the manual operation, never for-
get to use both handles.
1
Fig. 20
1. handles
