01-2019 5505 00
25
Programming
Notes
The electronics intended to control the ma-
chine will enable the operator to use many
functions or not.
The machine programme is intended to
describe all available functions, including
those that are not used due to the specific
configuration of the model (layout).
The following is supplied with the machine:
-Selection layout including the selections
arranged for the specific model
-Flow chart of programming menus.
The main functions required to manage the
machine operation as well as possible are
briefly explained here below, not neces-
sarily in the order they are displayed in the
menus.
The software release can be updated by
using proper systems (PC, Upkey etc.)
The machine can work in three different
operation modes.
The keyboard buttons may assume differ-
ent functions, according to its operation
state.
Normal
opEratioN
moDE
-The machine is powered on (the door is
closed) and all checks are performed.
-Operations that can be carried out when
the door is closed.
-The selection is dispensed and messages
are displayed for the user.
fillEr
m
ENu
-Statistical findings and execution of simple
checks on the operation and on dispens-
ing cycles.
tEcHNiciaN
mENu
/
toucH
/
usb
-The setups and the performances of the
machine are programmed.
POWER ON
Whenever you power on the machine, the
display will show the software release num-
ber.
You can programme the machine to display
the number of selections you have made for
some seconds.
The machine is set to the normal opera-
tion mode after some seconds. The display
will show a message requiring the user to
select a product.
r
Efill
rEsEt
(
if
rEquirED
)
The “refill code” is a 4-digit code used to
reset the counters that manage the signal-
ling of "ending products".
enter the “refill code” (1234 by default) to
reset the counters and set the machine to
the normal operation mode.
As an alternative press key
to set the ma-
chine to the normal operation mode without
resetting any counter.
After 1 minute, if no key is pressed, the ma-
chine will automatically switch to the normal
operation mode without resetting any coun-
ter.
