56
01-2019 5505 00
rEsEt
Statistics can be reset for relative counters
either globally (all types of data) or selec-
tively for:
-selections
-discounts
-failures
-coin mechanism data
-photocell error counters
-motor errors
- safety temperature exceeded (models
with food management enabled only)
Press the Enter key
to display the blink-
ing message: “Do you confirm?”
Press the Enter key
to reset the statis-
tics. The display shows the “Running” mes-
sage during the operation and statistics are
reset.
D
isplay
statistics
It displays the data stored for the machine
operation either globally (all data) or par-
tially (some data only).
total
couNtErs
1 - counter by selection (single and total);
2 - counter by band;
3 - failure counter;
4 - coin mechanism data (audit and cash
collected);
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
partial
couNtErs
1 - counter by selection (single and total);
2 - counter by band;
3 - failure counter;
4 - coin mechanism data (audit and cash
collected);
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
D
ElEtE
statistics
It resets the data stored for the machine op-
eration either globally (all data) or partially
(some data only).
-selections
-failures
-coin mechanism errors
-photocell error counters
-motor errors
- safety temperature exceeded (models
with food management enabled only)
Press the Enter key
to display the re-
quest for confirmation.
Press the Enter key
to reset the statis-
tics. The display shows the “Running” mes-
sage during the operation and statistics are
reset.
D
isplay
rElativE
statistics
Press
to display the stored data in se-
quence, i.e.:
1 - counter by single selection;
2 - counter by band;
3 - failure counter;
4 - coin mechanism data;
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
