01-2019 5505 00
73
HEAT SEPARATORS
The heat separators (marking out the ma-
chine food area) are fastened beneath the
trays.
If you wish to convert the machine to the
distribution of snack products only, remove
the heat separator:
assEmbly
Act as follows:
1. extract the trays
2. add the heat separators and secure them
by using brackets and screws
You can increase or decrease the trays
suitable for dispensing “food” products by
moving the heat separators and by defining
the number of “food” trays in the program-
ming menu.
1
2
1
Fig. 39
1. Fastening brackets
2. Heat separators
rEar
cHaNNEl
closurE
To avoid any temperature dispersion in the
food area, it is recommended to apply the
metal sheet closing the rear channel on the
trays marking out the food area.
Apply the bracket at the back of the tray.
1
2
Fig. 40
1. Bracket
2. Screws
