14
01-2019 5505 00
bottlEs
aND
caNs
Each compartment is configured to dis-
tribute different products according to the
spring position.
To extract the tray, take it by its base;
never take it by its springs or support
brackets.
Have a look at the figure and the table
here below to find out which product
you can load in each compartment.
Spring
position
Products to be loaded
1
0.33 - 0.25 "slim" cans
0.375 litre cans
2
0.33 litre bottles
3
0.50 litre bottles
0.5 litre cans
4
0.50 cl "slim" bottles
5
0.6 litre bottles
1
2
3
4
5
Fig. 14
It is important to know for which
product the compartment has been
configured to load it properly.
The following table has a general character.
It includes the settings the manufacturer
has experimentally determined for some of
the most common types of products.
Load the bottles and cans vertically with
the label turned to the glassfront so that the
label can be recognised and the upper part
arranged above the retainer spring.
1
2
Fig. 15
1. retainer spring
2. retainer spring fastening holes
