H.265 VANGUARD 4x2H / 8x4H / 16x8H
82
4.1.8.4 PD
When DVR detects moving people in a pre-defined area, the PD (Pedestrian Detection) event
will be triggered. You can configure some event actions like event recording, Email alert or
pop-up full screen when an event is triggered.
High
Level
Channel:
Select a channel you want to configure.
Switch:
Enable or disable the function.
Buzzer:
Select a time for DVR buzzer to sound when an event is triggered. Select
Disable
to
disable the buzzer.
Level:
Select among Small, Middle and Big. Small level is recommended to detect objects in
long distance. Big level is recommended to detect objects in short distance.
Scene:
Please select
Indoor
or
Outdoor
based on the location where your camera is installed.
Area:
Click the
Setup
button to set up the detection areas. Please refer to
4.1.8.4.1
Configuring PD Detection Area
for more details.
Post Recording:
Select a post recording time when an event is triggered.
Latch Time:
Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Alarm Out:
Check the box to enable the connected external alarm output device.
Show Message:
Check the box to display an “S” letter on the upper-right corner of the live
channel when an event is triggered.
Send Email:
Check the box to enable the Email alert function. When an event is triggered,
the DVR will send an email alert with a snapshot to the pre-configured Email receiver. Note
that for this function to work, you have to set up the Email function in advance (refer to
4.4.3 Email
).
