H.265 VANGUARD 4x2H / 8x4H / 16x8H
30
3.4.2.3 UTC Control
Click
UTC
to enter the UTC Control panel. On this panel, you can display the analog camera
OSD menu and configure the camera OSD settings.
Note:
EverFocus’ PTZ cameras can only connect to VANGUARD series DVRs through RS-
485. Therefore, EverFocus’ PTZ cameras does not support the UTC function.
Select a channel
Click to enter the UTC control panel
Select a Protocol
Operation Keys
To perform the UTC Control function:
1.
Select a camera and then select
COAX1
or
COAX2
from the
Protocol
drop-down list.
2.
Click the
button, the camera OSD menu will be displayed.
3.
You can use the
Up /
Down / Left / Right
buttons to select among the OSD menu items
and use
as the
Enter
button to enter the setup menu.
