H.265 VANGUARD 4x2H / 8x4H / 16x8H
160
5.4.1.5 Motion Detection
You can configure the motion settings and motion event notifications on this page. You can
also enable the Push Notification function to send motion event alerts to your mobile
devices (with VANGUARD App installed). For more details on Push Notification, please refer
to
Appendix B: Push Notification
.
To configure the Motion Detection settings:
1.
Select a channel from the
Channel
drop-down list.
2.
Switch the
Enable
button to the right to enable the motion detection function.
3.
Select a motion detection sensitivity level from the
Sensitivity
drop-down list. The higher
the value the higher the sensitivity.
4.
On the right-side image, the red blocks represents the areas are applied with the motion
detection function. You can click the mouse and drag it to draw multiple areas. To clear a
certain area, use the same method to draw on the same area again, the motion area will
be erased. By default, the whole areas are marked in red.
5.
Click the
Save
button to save the settings.
6.
To further set up the motion event notifications, enter the Motion alarm setup page
(please refer to
5.4.3.1 Motion
).
Click
Save
to save the settings or
Refresh
to refresh the page.
Click the
Copy
button to display the channel options. Select the channels and then click the
Copy
button to copy the same configurations from this channel to the selected channels.
