H.265 VANGUARD 4x2H / 8x4H / 16x8H
178
5.4.3.2 PIR
After configuring the PIR Detection settings (please refer to
5.4.1.6 PIR Detection
), you can
further configure the PIR Alarm settings.
Channel:
Select a channel from the drop-down list.
Buzzer:
Select a time for DVR buzzer to sound when a PIR event is triggered. Select
Disable
to disable the function.
Alarm Out:
Check the box to enable the connected external alarm output device.
Latch Time:
Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Post Recording:
Select a post recording time when a PIR event is triggered.
Show Message:
Switch the button to the right to enable displaying PIR icon on the live
channel when a motion event is triggered.
Send Email:
Switch the button to the right to enable the Email alert function. When a PIR
event is triggered, the DVR will send an email alert with a snapshot to the pre-configured
Email receiver. Note that for this function to work, you have to set up the Email function in
advance (refer to
5
.
4.4.3 Email
).
Full Screen:
Switch the button to the right to enable the full screen function. If this function
is enabled and a PIR event is triggered, the triggered channel will be displayed in full screen.
Record Channel:
Select the desired channel(s) you want to record when a PIR event is
triggered. Note that for PIR recording function to work, the Record Schedule function has to
be configured (please refer to
5.4.2.2.2Schedule
).
Click
Save
to save the settings or
Refresh
to refresh the page.
