H.265 VANGUARD 4x2H / 8x4H / 16x8H
195
Week: Select a month, a particular day and time when Daylight Saving starts and ends.
For example, 2am on the first Sunday of a particular month.
Date: Select the start date (click the calendar icon), end date and time when Daylight
Saving starts and ends.
Time Offset:
Select the amount of time that Daylight Saving has increased by in your time
zone. This refers to the difference in minutes, between Coordinated Universal Time (UTC)
and the local time.
Start Time:
Select a start time for the DST to start.
End Time:
Select an end time for the DST to stop.
【
NTP Settings
】
Select NTP and then configure the below settings. The NTP (Network Time
Protocol) function allows your DVR to automatically sync its clock with a time server. This
gives it the ability to constantly have an accurate time setting (your DVR will periodically
sync automatically).
Enable NTP:
Switch the button to the right to enable the NTP function. When NTP function is
enabled, the system will calibrate the system time at 00:07:50 daily and every time when the
system is started up.
Server Address:
Select a NTP server.
Time Zone:
Select a time zone of your region.
Click
Save
to save the settings or
Refresh
to refresh the page.
