Hub van Doorneweg 8 • 2171 KZ Sassenheim – NL •
T
+31(0)252 228850 •
F
+31(0)252 228235 •
E
I
euronormdrives.com
14
15
NEURN030000_220_A
NEURN030000_220_A
5.5 Examples of parameter settings
5.5.1 Instructions on viewing and modifying function code
JI500 inverter’s operation pane is three levels menu for parameter setting etc.
Three levels: function parameter group (Level 1)
→
function code(level 2)
→
function code setting(level 3).
The operation is as following:
Shutdown parameter display
PRG
Change parameter group
PRG
First-level menu display
ENTER
Change function parameter selection
PRG
ENTER
Change function parameter value
PRG
ENTER
Power-on
Second-level menu display
Third-level menu display
Operation processes
Description: Back to the level 2 menu from level 3 menu by PRG key or ENTER key in the level 3 operation status.
The differences between the two keys : ENTER will be back to the level 2 menu and save parameter setting before back,
and transfer to the next function code automatically; PRG will be back to the level 2 menu directly, not save parameter
setting, then back to current function code.
Example 1 Frequency setting to modify parameters
Set F0.01 from 50.00Hz~40.00Hz
Press
PRG
Press
ENTER
Press
▲
Press
▼
Press
ENTER
Press
PRG
Press
PRG
Press
ENTER
Flicker
Flicker
Flicker
Flicker
Flicker
Flicker
Example 2: Restore factory settings
Press
▲
Press
PRG
Press
ENTER
Flicker
Flicker
Flicker
Flicker
Press
PRG
Press
ENTER
Press
▲
Press
ENTER
Press
PRG
Without twinkling parameter position, the function code can not be modified in the level 3 menu.
The reason maybe as following:
1) The function code can not be modified itself, eg: Actual detecting parameters, running record parameters.
2) The function code can not be modified in the running status. It must be modified in the stop status.
