Esse-ti Europa GSM User Manual Download

Page: 27 / 154

INSTALLATION

Page

Other music source

A: Aux
B: Common

Loosen the right lateral part of the lid and rotate it downwards.

Connect the external music source to its connector as shown in the
figure.

Place the right lateral part of the lid back on.

Note: for activation, please refer to the paragraph “External music

source”

Amplifier

Europa GSM can be connected to an external amplifier, to be used as a pager.
The amplifier must be provided with an AUX input with volume control.

Disable the batteries with the relative procedure, and disconnect the
power supply cable from the mains.

Loosen the right lateral part of the lid and rotate it downwards.

Using an appropriate connector and a shielded cable, connect the
amplifier input to the music terminals of the music source connector, as
shown in the figure.

Summary of Contents for Europa GSM



























































































































































Search results

Summary of Contents for Europa GSM

Reviews:

Related manuals for Europa GSM

Brands by name

Popular brands

Esse-ti Europa GSM, User Manual

Search results

Summary of Contents for Europa GSM

Reviews:

Related manuals for Europa GSM

Brands by name

Popular brands