Esse-ti Europa GSM, User Manual

Page: 84 / 154

Page
84
PROGRAMMINGS
LCR
The LCR (Least Cost Routing) service allows you to route the outgoing calls
over either of the two lines (analogue or GSM), according to the dialled
number, for cost optimization purposes.
LCR settings are based on service classes, which have to be previously
programmed.
Each service class must be associated with compatible lines. As for the
analogue line, the service class can be also associated with a provider present
over the line. Europa GSM will automatically dial the provider code.
E.g.: a service class containing the sequence “3” (initial digit of cell
phone numbers) should be assigned to the GSM line for cost
optimisation.
Note: in order for different extensions to use the LCR system, the
service must be enabled via the “Service activation”
programming in the “Extension programming" chapter.
Note: the manual engagement of the line, or the selection via the
“line” button of the ST 600 Personal Phone system telephone,
deactivates the LCR function.
SC1 SC 2 SC 3 SC 4 SC 5 SC 6 SC 7 SC 8
L1/GSM
Lines
Provider
code L1
Assigning the lines to a service class
Allows you to associate one or both the lines to a service class.
DEFAULT :
- service classes 01~04 and 06~08: analogue line / GSM line
- service class 05: GSM line / analogue line.
(service class) (line)
(confirm)
¾
Pick up the handset of the system administrator extension (extension
41).
¾
Dial the code 2177.