Esse-ti Europa GSM, User Manual

Page: 81 / 154

PROGRAMMINGS Page
81
Note: we recommend inserting relay programming in a password-
protected menu.
Note: as a factory setting, the menus 01~09 are pre-set so that, when
the caller presses the * button, and after having entered the
user password, the control menu is recalled (menu 10).
Defining the “Operating button” event
Allows defining a digit, common to all menus, that, when dialled, diverts the
call directly to the extension enabled to answer the incoming calls over the
present line.
DEFAULT : no digit defined as “Operating button”.
Note: it is not possible to assign other actions to the event
programmed as “Operating button”.
Assigning the “Operating button” event
(event) (confirm)
¾
Pick up the handset of the system administrator extension (extension
41).
¾
Dial the code 2805.
¾
Enter the event:
00
the external user selects the 0 button
01 the external user selects the 1 button
…..
09
the external user selects the 9 button
0* the external user selects the * button
0# the external user selects the # button
¾
Wait for the confirmation tone and hang up.
Deleting the “Operating button”
(confirm)
¾
Pick up the handset of the system administrator extension (extension
41).
¾
Dial the code 280520.
¾
Wait for the confirmation tone and hang up.
Note: deleting the “Operating button” event involves defining the
dialling as “Non-activated”.