background image

 

AUXILIARY SERVICES

 

Page

 119 

AUXILIARY SERVICES 

WARNING 

Europa GSM allows two external conversations 

and two internal conversations at the same time, 

but it allows to dial only one number at a time. 

Therefore, if picking up the handset you don't 

receive the dialling tone, hang up and wait for the 

other extension to finish dialling.  

Note:  the following paragraphs describe how to use  the telephone 

services with multifrequency (MF) telephones; if you have to 
use a decadic (DC) telephone, dial 

2

 instead of pressing the  

R

 button. 

A

NNOUNCEMENT OVER EXTERNAL AMPLIFIER

 

Allows making an announcement over an external amplifier connected to the 
Europa GSM amplifier output. 

 

 (announcement) 

 

¾

 

Pick up the handset and dial the code 332. 

A sequence of notes will be sent on the amplifier as an announcement advice. 

¾

 

Make the announcement. 

¾

 

Hang up. 

Note:  the announcement can be made while the internal/external 

user is on hold. In this case, press R twice to retrieve 
conversation. 

Note:  all the extensions are enabled to use this service by default 

(see “Service activation” at page 59). 

Summary of Contents for Europa GSM



























































































































































Reviews: