Esse-ti Europa GSM User Manual Download

Page: 99 / 154

REMOTE PROGRAMMING

Page

REMOTE PROGRAMMING

A remote programming of Europa GSM is possible either via remote
programmer device, or by sending programming codes via SMS.

EMOTE PROGRAMMING

Remote programming can be accessed through user consent, or through a
previously set OPA menu.

Access through user consent

The user must enable access to the Europa GSM remote programming with a
code.

(conversation)

.(confirm)

Call the service centre or the installer with remote programmer device
from the Europa GSM extension, or make them call you.

When prompted, dial the remote programming activation code: R3910.

Wait for the confirmation tone and hang up.

Access from OPA menu

The OPA menu must be appropriately programmed, by assigning the operation
“Access to remote programmer with installer PWD” to a button (see
“Automatic operator (OPA)).

The service centre or the installer with remote programmer device calls
Europa GSM from remote.

Listen to the OPA menu prompting message, and, once over, dial the
number associated with access to the remote programmer.

Dial the installer password after the tone.

Summary of Contents for Europa GSM



























































































































































Search results

Summary of Contents for Europa GSM

Reviews:

Related manuals for Europa GSM

Brands by name

Popular brands

Esse-ti Europa GSM, User Manual

Search results

Summary of Contents for Europa GSM

Reviews:

Related manuals for Europa GSM

Brands by name

Popular brands