Page
32
Programmings to be performed during installation phase
PROGRAMMINGS TO BE PERFORMED
DURING INSTALLATION PHASE
S
ETTING A DEFAULT CONFIGURATION
A default configuration is given by a set of programmings through which it is
possible to establish the basic operation of the system.
Europa GSM has five default configurations, which can be recalled by a single
programming code:
•
HOME 10
: for
home
installation;
•
HOME 11
: for
home
installation;
•
OFFICE 20
:
for office installation;
•
OFFICE 21
:
for office installation;
•
OFFICE 22
:
for office installation.
For Europa GSM to operate correctly, one of the
five default configurations must be chosen during
the installation phase. Each configuration can be
modified or customised at any time via the
programming codes.
Home 10
The
HOME 10
configuration provides for:
-
the presence of the GSM line only;
-
the automatic engagement of the external line for all extensions (it is not
necessary to dial 0);
-
premium rate call barring (e.g. 144-166-899);
-
PRESENT profile
. the incoming calls will make all the telephones ring;
-
ABSENT profile
. the incoming calls will make all the telephones ring;
. call forwarding towards a number to be programmed is enabled
for incoming doorphone calls;
. voicemail service is enabled on extension 41 (ten 20-second
messages);
-
RELAX profile
Summary of Contents for Europa GSM
Page 1: ...USER S MANUAL Installation and use...
Page 154: ...EUROPA GSM 21 11 2012 edition...